Specifications

Chapter 3 Operation Installation and Operation Manual
3-8 Configuration and Management Alternatives ASMi-54 Ver. 1.0
Navigating Tables
Some of the management screens, such as the Manager table, are tables that are
larger than regular menus and may require scrolling to navigate between
parameters. These screens are best viewed when your terminal screen is set to
132 character width.
Use the following keys (case-sensitive) for table navigation:
Table 3-9. Table Navigation Keys
Key Navigation
<Ctrl>+L Move left
Left Arrow Move left
Ctrl>+R Move right
Right Arrow Move right
Up Arrow Move up
Down Arrow Move down
<Tab> Select the next changeable cell
G<row number>, <col number> Go to the specified cell
You can display these navigation keys by typing <?> from a table.
The following figure shows a Static MAC table in VLAN-Aware mode. For
VLAN-unaware bridges, the “VLAN ID” column is not displayed. VLAN ID, MAC
address, and Receive Bridge port are the columns of the parameters to be
defined.
The “A – Add ; R – Remove ; C – Clear” line appears when at least one entry is
configured. If the table is empty, only “A - Add” is displayed.
ASMi-54
Main Menu>Configuration>Applications>Bridge>Static MAC table
VLAN ID MAC address Receive Bridge port
1 1 11-11-11-11-11-11 1
| 2 1 22-22-22-22-22-22 2
v 3 2 33-33-33-33-33-33 3
4 3 44-44-44-44-44-44 3
5 4 55-55-55-55-55-55 5
1. MAC address … (11-11-11-11-11-11)
A – Add ; R – Remove ; C – Clear
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 3-7. Sample Table Screen (Static MAC Table)
Note