Specifications

ASMi-54 Ver. 1.0 Indicators 3-1
Chapter 3
Operation
This chapter provides the following information for ASMi-54:
• Explains power-on and power-off procedures
• Provides a detailed description of the controls and indicators and their
functions
• Provides instructions for using a terminal connected to the ASMi-54 control
port
• Describes how to navigate menus
• Describes the configuration alternatives.
For a detailed explanation of parameters on the menus, see
Chapter 4 .
The installation procedures given in
Chapter 2 must be completed and checked
before attempting to operate the ASMi-54.
3.1 Turning On the Unit
 To turn on the ASMi-54 unit:
• Connect the power cord to the mains.
The PWR indicator lights up and remains lit as long as ASMi-54 receives
power.
ASMi-54 requires no operator attention once installed, with the exception of
occasional monitoring of front panel indicators. Intervention is only required
when the unit must be configured to its operational requirements, or when
diagnostic tests are performed.
3.2 Indicators
The ASMi-54 LEDs are located on the front panels.
Front Panel Indicators
Figure 3-1 and Figure 3-2 show the typical front panel. Table 3-1 describes the
functionality of the ASMi-54 front panel LEDs.