Specifications

Chapter 1 Introduction Installation and Operation Manual
1-14 Technical Specifications ASMi-54 Ver. 1.0
Timing
Derived from alternative sources:
• Internal oscillator (only CO unit)
• Receive, derived from the SHDSL received signal
(only CPE unit)
Diagnostics
Statistics and
Performance
Monitoring
SHDSL performance
Indicators
(Front Panel)
PWR (green) On: ASMi-54 is powered on
Off: ASMi-54 is off
TST (yellow) On: A test is active
Off: A test is inactive
SHDSL SYNC
(green/red)
Green: at least one PME is synchronized and can pass
data
Green blinking: no PME is synchronized and at least one
PME is in training process
Red blinking: no PME is synchronized or in training
process, and at least one PME is in PAF establishment
stage
Red: no PME is synchronized, in training process, or in
PAF establishment stage
ALM (red) On: A new alarm is detected in the alarm buffer
Off: No alarm currently detected
Indicators
(Rear Panel)
Ethernet Ports
(one or four)
LINK/ACT
(green/yellow)
On (green): Ethernet port link is up
Off: No Ethernet link on the port
Blink (yellow): Ethernet traffic on the port
Power Source
AC/DC Voltage Wide-range power supply: 100-240 VAC, -48/60 VDC
nominal
Power
Consumption
4 × Ethernet Port
2-wires: 5.2 W
4-wires: 5.5 W
8-wires: 7W