Specifications

Chapter 3 Configuration Installation and Operation Manual
3-14 Configuring Ethernet Services ASMi-54C LRS-102 Ver. 2.0
The maximum number of bridge ports that can be defined on an ASMi-54C
module, together with the two Ethernet ports, is up to 10.
After performing the configuration activities listed above, you can configure each
Ethernet services traffic flow that is terminated on the ASMi-54C being
configured (either at a bundle or at an Ethernet port), and map the other end to
the prescribed bridge port.
For the supervision terminal, use Configuration > Applications > Ethernet Services
> Flows (for instructions, refer to the
LRS-102 Installation and Operation Manual ;
bridge ports are referred to as
bridge ports on supervision terminal screens).
To configure a management flow, use Configuration > System > Management >
Flow.
Note