Specifications

Installation and Operation Manual Chapter 3 Configuration
ASMi-54C LRS-102 Ver. 2.0 Configuring Physical Layer Parameters of SHDSL Lines 3-9
Table
3-3. Supported Lines versus Wires Parameter
Line Number Available Modes Description
1
2 Wires Line independently configurable
4 Wires Line 1 bonded with Line 2.
Line 1 is the master line, and all its parameters will be
copied to Line 2. Line 2 and PCS 2 will not be
available to selection by the user
8 Wires Line 1 bonded with Line 2, Line 3 and Line 4.
Line 1 is the master line, and all its parameters will be
copied to Line 2, Line 3, and Line 4. Line 2, 3, 4 and
PCS 2, 3, 4 will not be available for selection by the
user
2 2 Wires Line independently configurable
3
2 Wires Line independently configurable
4 Wires Line 3 bonded with Line 4.
Line 3 is the master line, and all its parameters will be
copied to Line 4. Line 4 and PCS 4 will not be
available to selection by the user
4 2 Wires Line independently configurable
5
2 Wires Line independently configurable
4 Wires Line 5 bonded with Line 6.
Line 5 is the master line, and all its parameters will be
copied to Line 6. Line 6 and PCS 6 will not be
available to selection by the user
8 Wires Line 5 bonded with Line 6, Line 7 and Line 8.
Line 5 is the master line, and all its parameters will be
copied to Line 6, Line 7 and Line 8. Line 6, 7, 8 and
PCS 6, 7, 8 will not be available for selection by the
user
6 2 Wires Line independently configurable
7
2 Wires Line independently configurable
4 Wires Line 7 bonded with Line 8.
Line 7 is the master line, and all its parameters will be
copied to Line 8. Line 8 and PCS 8 will not be
available to selection by the user
8 2 Wires Line independently configurable