Specifications

ASMi-54C LRS-102 Ver. 2.0 Default Settings 3-1
Chapter 3
Configuration
This Chapter provides specific configuration information for ASMi-54C modules
that supplement the LRS-102 configuration instructions appearing in the
LRS-102
Installation and Operation Manual
.
The configuration activities are performed by means of the management system
used to control the LRS-102 unit.
For general instructions, additional configuration procedures, and background
information, refer to the
LRS-102 Installation and Operation Manual .
3.1 Normal Indications
After the equipment connected to the ASMi-54C Ethernet ports is operational,
the following indications should appear for each port:
• The LINK indicator lights as long as the port is connected to operational
equipment
• The ACT indicator may light continuously, or flash from time to time, in
accordance with the transmit and receive activity at the corresponding port.
3.2 Default Settings
Table 3-1 lists the ASMi-54C factory-default parameters.
Table 3-1. ASMi-54C Factory-Default Parameters
Parameter Description Factory Default Value
SHDSL Line Physical Layer Parameters
Line SHDSL line index number
1
Administrative Status Port administrative status Down
Name Line logical name Empty string
Wires Number of lines (wire pairs)
2 wires
TC Layer Transmission Convergence layer
64/65-octet
STU Port operating mode
Central
Power Backoff Transmit power backoff
0