Specifications

Installation and Operation Manual Chapter 2 Installation and Setup
ASMi-54C LRS-102 Ver. 2.0 Connecting to ASMi-54C Modules 2-5
³ To connect the cable to the module:
1. Connect the 26-pin connector of the CBL-DB26-8SHDSL cable to the module
SHDSL.bis front panel SHDSL.bis connector.
2. Connect the RJ-45 plug of each line (the plugs are marked CH-1 to CH-8) to
the prescribed user’s equipment or patch panel connector. Insulate unused
connectors, to prevent accidental short-circuiting of their exposed contacts
to metallic surfaces.