Specifications

Chapter 1 Introduction Installation and Operation Manual
1-6 Physical Description ASMi-54C LRS-102 Ver. 2.0
1.2 Physical Description
ASMi-54C modules occupy one I/O slot in the LRS-102 chassis. Typical panels are
shown in
Figure 1-2 .
Figure 1-2. Typical Module Panels
A
SMi-54C
S
H
D
S
L
.
b
i
s
LINK
ACT
1
2
E
T
H
ASMi-54C
LASER
CLASS
1
E
T
H
S
H
D
S
L
.
b
i
s
LINK
ACT
1
2
ASMi-54C with
Copper
Ethernet Ports
ASMi-54C with
Ethernet Ports
Equipped with SFPs
The module panels include:
• 26-pin D-type female connector, designated SHDSL.bis, for connecting to all
the SHDSL ports.
• Ethernet interfacing section: includes two Ethernet ports, designated ETH1
and ETH2. The ports are equipped either with SFPs, or terminated in RJ-45
connectors. Each port has its own set of ACT and LINK status indicators. The
functions of the ETH port status indicator are as follows:
 ACT (yellow): flashes in accordance with the transmit and/or receive
activity on the corresponding port
 LINK (green): lights when the link integrity signal is detected by the
corresponding port (normal operating condition).