Specifications

Installation and Operation Manual Chapter 1 Introduction
ASMi-54C LRS-102 Ver. 2.0 Overview 1-5
When only up to 8 ASMi-54C cards are planned for the chassis operation, a
separate low-consumption power supply can be ordered from RAD (see ASMi-54C
Data Sheet).
The total Ethernet traffic handling capacity of each ASMi-54C depends on the
SHDSL line rates. The maximum is always 2 × 22.8 Mbps each (approx. 45 Mbps),
irrespective of the number of pairs used for SHDSL transmission.
In general, the above-mentioned capacities should be interpreted as average
capacities; the peak traffic handling value may be much higher, considering the
statistical characteristics of the customer’s Ethernet traffic reaching the module
ports, and the effects of activating the flow control option (independently
configurable for each external Ethernet port).
Support for Inband Management
ASMi-54C supports the transfer of inband management traffic for Ethernet
applications. Inband management over ASMi-54C Ethernet ports (both external
and SHDSL-based) is possible by configuring the desired ports in the
management flow configured by the user (LRS-102 supports up to 64 bridge
ports in the management flow).
Note