Specifications
Table Of Contents
- Front Matter
- Quick Start Guide
- Contents
- Chapter 1 Introduction
- Chapter 2 Installation and Setup
- Chapter 3 Operation
- Chapter 4 Configuration
- Chapter 5 Troubleshooting and Diagnostics
- Appendix A Pinouts
- Appendix B Memory and Download
- Appendix C List of Parameters
- Appendix D IR-ETH Ethernet Card
- Appendix E IR-ETH/Q Ethernet Card
- Appendix F IR-ETH/QN Ethernet/Fast Ethernet Card
- Appendix G IR-IP Interface Card
- G.1 Introduction
- G.2 Technical Specifications
- G.3 Installation and Operation
- G.4 IR-IP Management Subsystem, General
- G.5 Performing Preliminary Configuration
- G.6 IR-IP Management Utility
- G.7 Quick Setup Menu
- G.8 Management Access Menu
- G.9 Advanced Setup Menu
- G.10 Device Control Menu
- G.11 View Menu
- G.12 Diagnostic Tool (Ping Terminal) Menu
- Back Matter

Appendix C List of Parameters Installation and Operation Manual
C-12 Displaying Modem Status ASMi-52CD Ver. 1.0
Parameter Type Use Value Indication
ACTUAL ANNEX
Read Annex compatibility ANNEX A
ANNEX B
LINE STATUS A Read Status of Line A SYNC
NOT SYNC
LINE STATUS B Read Status of Line B SYNC
NOT SYNC
SHDSL STATUS A Read Status of DSP A IDLE
HANDSHAKE
TRAINING
FRAME IN
SYNC
DATA
DIGITAL
LOOPBACK
CORE
LOOPBACK
SHDSL STATUS B Read Status of DSP B IDLE
HANDSHAKE
TRAINING
FRAME IN
SYNC
DATA
DIGITAL
LOOPBACK
CORE
LOOPBACK
LINE RATE A Read Line A rate
LINE RATE B Read Line B rate
LINE TOTAL RATE Read Line A and Line B
combined rate (no line
B for 2-wire modems)
Actual PSD Read Current power spectral
density type
RATE PSD
UNKNOWN
ASYNC PSD
DISABLE
ASYNC R1
ENABLE
ASYNC R2
ENABLE
EOC COMP Read Compatibility of the
embedded operation
channel
STANDARD
PROPRIETARY
TIP RING Read Wire polarity detection
method
NORMAL
REVERSED