Specifications

Installation and Operation Manual Appendix C List of Parameters
ASMi-52CD Ver. 1.0 Displaying Modem Status C-11
MODEM NAME:ASMi-52CD
DEFINE MODEM PORT NUMBER: 1
SELECT MODEM : MODEM 1 LOCAL
RATE SUPPORTED : 2M PS1 TYPE : NONE
SHDSL MODE : STU-C PS2 TYPE : NONE
WIRE MODE : 2W BOX TYPE : N/A
FRAMER TYPE : SLOTTED E1 ACTUAL ANNEX : ANNEX B
LINE STATUS A : SYNC LINE STATUS B : SYNC N/A
SHDSL STATUS A : DATA SHDSL STATUS B : N/A
LINE RATE A : 2048K + 8K LINE RATE B : N/A
LINE TOTAL RATE : 2048K + 8K ACTUAL PSD : ASYM PSD DISABLE
EOC COMP : PROPRIETARY TIP RING : NORMAL
BERT PATTERN : N/A
Figure C-6. Modem Status Screen: More Parameters
Table C-6. Modem Status Screen: Second Screen Parameters
Parameter Type Use Value Indication
MODEM NAME Read Viewing the modem
type
ASMi-52CD
ASMi-52
Master ASMi-52CD
Standalone ASMi-52 modem
MODEM1 LOCAL
MODEM2 LOCAL
Operational parameters are set
for one of the local modems
installed in the LRS-24 chassis.
SELECT MODEM Write Selected a modem
MODEM1
REMOTE
MODEM2
REMOTE
Operational parameters are set
for one of the remote local
modems
RATE SUPPORTED
Read Data rate supported by
the modem
2M
4M
PS1 TYPE Read Type of power supply 1
(remote standalone
only)
AC, DC
PS2 TYPE Read Type of power supply 2
(remote standalone
only)
AC, DC
SHDSL MODE Read Modem location STU-C Central
WIRE MODE Read Line interface type 2W
4W
2-wire
4-wire
BOX TYPE Read Type of remote unit
enclosure
PLASTIC
METAL
FRAMER TYPE Read SHDSL framer type N*64
E1 slotted (E1
only)