Specifications

Appendix C List of Parameters Installation and Operation Manual
C-10 Displaying Modem Status ASMi-52CD Ver. 1.0
Table C-5. Modem Status Screen Parameters
Parameter Type Use Value Indication
MODEM
NAME
Read Viewing the modem type ASMi-52CD
ASMi-52
Master ASMi-52CD
Standalone ASMi-52 modem
SELECT MODE
M
Read Viewing the selected
modem
MODEM1 LOCAL
MODEM2 LOCAL
MODEM1 REMOTE
MODEM2 REMOTE
Operational parameters are set
for one of the local modems
installed in the LRS-24 chassis.
Operational parameters are set
for one of the remote local
modems
REMOTE
MODEM
Read Viewing the remote modem
type
ASMi-52 Standalone ASMi-52 modem
REMOTE
MODEM LINE
CONNECTOR
Read Viewing the type of
connector at the remote
modem
INTERFACE
MODULE
Read Viewing the type of
interface module in LRS-24
chassis.
LRSI-14
LRSI-23
LRSI-5
LRSI-24
LRSI-25
LRSI-F-14 or LRSI-B-14
LRSI-F-23 or LRSI-B-23
LRSI-F-5 or LRSI-B-5
LRSI-F-24 or LRSI-B-24
LRSI-F-25 or LRSI-B-25
MODEM PORT Read Viewing the type of digital
interface mounted on the
modem. This parameter is
needed to associate a DCE
connector with several
digital interfaces mounted
on the
ASMi-52CD module
ETHERNET
IR-ETH-Q
IR-ETH-QN
IR-IP
V.35
RS-530
X.21
E1
IR-ETH
IR-ETH/Q
IR-ETH/QN
IR-IP
V.35
RS-530
X.21
E1
SW VERSION Read Viewing current software
version
HW VERSION Read Viewing current hardware
version
HW PANEL
VERSION
Read Viewing current LRSI panel
hardware version
LED STATUS Read Viewing status of front
panel LEDs
ON, OFF (for
interpretation of
the LED states, see
Chapter 2