Specifications
Table Of Contents
- Front Matter
- Quick Start Guide
- Contents
- Chapter 1 Introduction
- Chapter 2 Installation and Setup
- Chapter 3 Operation
- Chapter 4 Configuration
- Chapter 5 Troubleshooting and Diagnostics
- Appendix A Pinouts
- Appendix B Memory and Download
- Appendix C List of Parameters
- Appendix D IR-ETH Ethernet Card
- Appendix E IR-ETH/Q Ethernet Card
- Appendix F IR-ETH/QN Ethernet/Fast Ethernet Card
- Appendix G IR-IP Interface Card
- G.1 Introduction
- G.2 Technical Specifications
- G.3 Installation and Operation
- G.4 IR-IP Management Subsystem, General
- G.5 Performing Preliminary Configuration
- G.6 IR-IP Management Utility
- G.7 Quick Setup Menu
- G.8 Management Access Menu
- G.9 Advanced Setup Menu
- G.10 Device Control Menu
- G.11 View Menu
- G.12 Diagnostic Tool (Ping Terminal) Menu
- Back Matter
Appendix B Memory and Download Installation and Operation Manual
B-4 Download Procedure ASMi-52CD Ver. 1.0
Downloading via CM-2 Flash
This option should be used when the CM-2 already contains a new software file
that you want to download to the modem.
To download via CM-2 Flash:
1. From the Modem Download menu, select Modem Download via CM2 FLASH.
A menu with a list of the available software versions that reside in the
CM-2 flash appears (see
Figure B-5
).
2. Select one of the versions by pressing <F> or <B>.
The downloading process begins. All the TST LEDs of the corresponding
ASMi-52CD module start blinking.
MODEMS DOWNLOAD via CM2 FLASH
CM2 containing the following versions:
ID Modem Type Version No. Date Size Location
1 ASMi-52CD 0.2 2000-6-6 230k FLASH2
2 NULL 0.0 0-0-0 0k EMPTY
3 NULL 0.0 0-0-0 0k EMPTY
Please choose the ID number
ID NUMBER: 1
Download to Remote Modems: N/A
To change the ID number press f to scroll forward or b to scroll backward
Figure B-5. Modem Download via CM2 Flash
Changing Modem Software Version
To change modem software version:
1. From the Modem Download menu, select Change CM-2 software version.
A screen appears with a list of the available software versions that reside
in the modem Flash. The first version in the list is the one that is
currently running (see
Figure B-6
).
2. Select the modem which software version you want to change by pressing
<F> or <B>.
3. Select the ID NUMBER of the new modem software version by pressing <F> or
<B>.
4. Press <Enter>.