Specifications
Table Of Contents
- Front Matter
- Quick Start Guide
- Contents
- Chapter 1 Introduction
- Chapter 2 Installation and Setup
- Chapter 3 Operation
- Chapter 4 Configuration
- Chapter 5 Troubleshooting and Diagnostics
- Appendix A Pinouts
- Appendix B Memory and Download
- Appendix C List of Parameters
- Appendix D IR-ETH Ethernet Card
- Appendix E IR-ETH/Q Ethernet Card
- Appendix F IR-ETH/QN Ethernet/Fast Ethernet Card
- Appendix G IR-IP Interface Card
- G.1 Introduction
- G.2 Technical Specifications
- G.3 Installation and Operation
- G.4 IR-IP Management Subsystem, General
- G.5 Performing Preliminary Configuration
- G.6 IR-IP Management Utility
- G.7 Quick Setup Menu
- G.8 Management Access Menu
- G.9 Advanced Setup Menu
- G.10 Device Control Menu
- G.11 View Menu
- G.12 Diagnostic Tool (Ping Terminal) Menu
- Back Matter
Installation and Operation Manual Appendix B Memory and Download
ASMi-52CD Ver. 1.0 Download Procedure B-3
Downloading via LAN
When this option is selected, the new software file is transferred from a server to
the CM-2, using the TFTP protocol.
To download via LAN:
1. From the Modem Download menu, select Modem Download via LAN.
The Download via LAN menu appears (see
Figure B-3
).
2. Enter IP address of TFTP server and file name.
3. Press <Enter>.
The file is transferred via the Ethernet connection of the CM-2, using the
TFTP protocol.
Download via LAN
IP Address of TFTP server: 000.000.000.000
File name: Insert file name for download
Remote modems: N/A
Figure B-3. Download via LAN Menu
Downloading via XMODEM
When this option is selected, the new software file is transferred from a server to
the CM-2, using the XMODEM protocol.
To download via XMODEM:
1. From the Download Main menu, select CM2 or Modems Download via
XMODEM.
2. After typing the parameter data, press <Enter> to start the download
process.
3. Start the XMODEM server, when CM-2 displays the following message:
The CM-2 is waiting to the XMODEM data. Start the process
within one min.
If after one minute the XMODEM server has not connected properly to the
CM-2, the message The download action has failed appears.
Download via XMODEM
Remote modems: N/A
Figure B-4. Download via XMODEM Menu