Specifications

Table Of Contents

Installation and Operation Manual Chapter 2 Installation and Setup

ASMi-52CD Ver. 1.0 Connecting the Interface Cables 2-7

2.5 Connecting the Interface Cables

ASMi-52CD is connected to the line and DTE via the interface module. Identify the

necessary cables for the interface module you have installed and prepare the line

and DTE cables. Refer to

Table 2-1

Table 2-2

to prepare the line cable. Refer to

Appendix A

for information on adapter cables and pin assignments for the DTE

cables.

Connecting the Line and DTE

 To connect the line and DTE cables to the interface module:

1. Connect the line and DTE cables to the appropriate interface module

connectors.

2. Use the side screws of the DTE cable connector to fasten the cable to the

interface module DTE connector.

Table 2-1. Pin Assignment of Line Connector for ASMi-52CD

Pins ID Function Direction

4, 5 LINE Bidirectional line Input/Output

1, 2, 3, 6, 7, 8 – Not connected –

Table 2-2. Pin Assignment of Line Connector for ASMi-52CD/4

Pins ID Function Direction

1, 2, 4, 5 LINE Bidirectional line Input/Output

3, 6, 7, 8 – Not connected –