Specifications
Table Of Contents
- Front Matter
- Quick Start Guide
- Contents
- Chapter 1 Introduction
- Chapter 2 Installation and Setup
- Chapter 3 Operation
- Chapter 4 Configuration
- Chapter 5 Troubleshooting and Diagnostics
- Appendix A Pinouts
- Appendix B Memory and Download
- Appendix C List of Parameters
- Appendix D IR-ETH Ethernet Card
- Appendix E IR-ETH/Q Ethernet Card
- Appendix F IR-ETH/QN Ethernet/Fast Ethernet Card
- Appendix G IR-IP Interface Card
- G.1 Introduction
- G.2 Technical Specifications
- G.3 Installation and Operation
- G.4 IR-IP Management Subsystem, General
- G.5 Performing Preliminary Configuration
- G.6 IR-IP Management Utility
- G.7 Quick Setup Menu
- G.8 Management Access Menu
- G.9 Advanced Setup Menu
- G.10 Device Control Menu
- G.11 View Menu
- G.12 Diagnostic Tool (Ping Terminal) Menu
- Back Matter

Appendix G IR-IP Interface Card Installation and Operation Manual
G-26 View Menu ASMi-52CD Ver. 1.0
Multicast Groups Table Screen
This screen is used to display information about the multicast group IP addresses
and their status.
To access the Multicast Groups Table screen:
• In the View menu, type 3.
The Multicast Groups Table screen appears (
Figure G-23
).
IR_IP <IR-IP> S/W Ver. 1.21 (date)
Multicast Groups Table
----------------------
Group IP Address Status Group IP Address Status
Press any key for exit
Figure G-23. Multicast Groups Table Screen
Statistics Screen
The Statistics screen is used to display statistical information on the traffic
between the networks connected by IR-IP. The data displayed on this screen
enables you to evaluate the IR-IP performance. Two different Statistics screens
are used, one for the LAN side and the other for the WAN side.
To access the Statistics menu:
• In the View menu, type 4.
The LAN and WAN Statistics screens appear (
Figure G-24
and
Figure G-25
).