Tus neeg siv phau ntawv

B-RAD Select
USER MANUAL
New World Technologies Inc. Page 5
V2022.06.20
GENERAL POWER TOOL SAFETY WARNINGS
WARNING!
READ ALL SAFETY WARNINGS, INSTRUCTIONS, ILLUSTRATIONS, AND SPECIFICATIONS
PROVIDED WITH THIS POWER TOOL. FAILURE TO FOLLOW ALL INSTRUCTIONS LISTED
BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND/OR SERIOUS INJURY.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term “power tool” in the warnings refers to your battery-operated (cordless) power tool.
1. Work Area Safety
a. Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating the power tool. Distractions can cause you to
lose control.
2. Electrical Safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce
the risk of electric shock.
b. Avoid body contact with earthed (grounded) surfaces such as pipes, radiators, ranges, or
refrigerators. There is an increased risk of electric shock if your body is earthed (grounded).
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.
d. Do not abuse the cord. Never use the cord to carry, pull, or unplug the power tool. Keep cord
away from heat, oil, sharp edges, and moving parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use a Ground Fault Circuit
Interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
3. Personal Safety
a. Stay alert, watch what you are doing, and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A
moment of inattention while operating power tools may result in serious personal injury.
b. Use personal protective equipment and always wear eye protection. Protective equipment such as
a dust mask, non-skid safety shoes, hard hat, and hearing protection used in appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off position before connecting to a power
source and/or battery pack, picking up, or carrying the tool. Carrying power tools with your finger on the switch
or energizing power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away
from moving parts.