Tus neeg siv phau ntawv

B-RAD Select
USER MANUAL
Page 14 New World Technologies Inc.
V2022.06.20
3.2.1 Change the Torque Units
 Press a button to toggle between f
(foot-pounds) and
n (newton-
metres) as shown in Figures 3.2.1-1
and 3.2.1-2.
 To exit the Unit Select menu, press
and hold both buttons.
Figure 3.2.1
-
1: Units
–
ft·lb
Figure 3.2.1
-
2: Units
–
N·m
 The N·m indicator lights when N·m
units are used (Figure 3.1.2-3), and
the ft·lb indicator lights when ft·lb
units are used (Figure 3.1.2-4).
Note: When the units are changed, the torque
setting will be converted into the new units.
Figure 3.2.1-3: N·m Display Figure 3.2.1-4: ft·lb Display
3.2.2 View the Battery Voltage
 Move to the next menu item: “batt.”
The battery voltage is shown (Figures
3.2.2-1 and 2).
 When the battery voltage gets too
low, the message “Lo-b” will flash on
any screen to warn you that the
battery needs charging.
Figure 3.2.2-1: Battery Menu Figure 3.2.2-2: Actual Voltage
3.2.3 View Tool Temperature
 Move to the next menu item: “Heat.”
Tool temperature is shown (Figures
3.2.2-1 and 2).
 When tool temperature is to low or
gets too high, the messages “Cold”
and “Hot”, respectively, will flash on
any screen and disable the tool from
operating until it is at an acceptable
temperature.
Figure 3.2.3-1: Heat Menu Figure 3.2.3-2: Temperature
3.2.4 Change the LED Brightness
 Move to the next menu item: “Lite.”
The number of lines shown depict
how bright the LED Display is
(Figures 3.2.4-1 and 2). Use the
and buttons to change the display
brightness.
Figure 3.2.4-1: Lite Menu Figure 3.2.4-2: LED Brightness