Manualshelf

Tus neeg siv phau ntawv

ManualsBrandsRAD TORQUE ManualsBolting WrenchRAD TORQUE B-RAD 1500 Advanced Bolting Wrench
11121314151617181920
B-RAD Select
USER MANUAL
Page 12 New World Technologies Inc.
V2022.06.20
2.4 RAD Battery Charger
CAUTION!
The RAD Li-Ion Battery Pack should only be charged on the RAD Battery Charger. If an incompatible charger
is used, damage to the RAD Battery will occur.
The Charging Status Display (Figure 2.4-1) indicates when the
RAD Battery is charging, when the charge is complete, and if
there is an error.
Figure 2.4-1: Charging Status Display
2.4.1 Charging the RAD Li-Ion Battery Pack
Note: The temperature range for charging is 0˚C to 50˚C (32  F to 122  F).
To charge the RAD Battery:
1. Plug the RAD Battery Charger into the wall outlet. The Red Warning Light will turn on for one second and
then the Green Status Light will turn on for one second.
2. Align the RAD Battery with the RAD Battery Charger.
3. Slide the RAD Battery into place. The Green Status Light will flash while the RAD Battery is charging.
When the RAD Battery has been fully charged, the Green Status Light will stop flashing and stay illuminated.
Until the RAD Battery is removed from the RAD Charger, the Charger will maintain the battery charge at
maximum capacity.
To remove the RAD Battery:
1. Slide the RAD Battery away from the RAD Charger.
2. Check that the RAD Battery is fully charged (refer to Section 2.3.2 – Check RAD Battery Charge).
2.4.2 Charging Errors
The Red Warning Light is on:
The RAD Battery is not charging because its temperature is not within the required temperature range for
charging. When the RAD Battery’s temperature changes to within the required range, the Red Warning Light
will turn off and charging will commence.
The Red Warning Light is flashing:
The RAD Battery may be placed incorrectly on the RAD Battery Charger. Remove the RAD Battery and replace
it correctly on the RAD Battery Charger. If the Red Warning Light continues to flash, the RAD Battery is defective;
remove the RAD Battery immediately.
If these problems continue, contact New World Technologies Inc. Technical Support (refer to Section 7.0 –
Contact Us) or your RAD Distributor.
Green
Status Light
Red
Warning
Light