System information

User's Manual Chapter 4 Configuring a Typical Application
Vmux-210 Ver. 1.0 Configuring the Network Management Station 4-7
Figure 4-4. Map Object Properties - Access Tab
5. In the Attrib area, click Read Community.
6. In the Value field, select public.
7. In the Attrib area, click Read/Write Community.
8. In the Value field, select private.
9. In the Attrib area, click Trap Community.
10. In the Value field, select public.
11. Click OK.
The Vmux icon appears on the SNMPc Management Console map.
12. Repeat this procedure for the remaining two Vmux devices.