Manualshelf

System information

ManualsBrandsRAD Data comm ManualsComputer equipmentVmux-210
71727374757677787980
User's Manual Chapter 4 Configuring a Typical Application
Vmux-210 Ver. 1.0 Configuring the Network Management Station 4-5
Figure 4-2. SNMPc Management Console
Creating the Network Nodes
Before you can configure the circuits in RADview-SC/Vmux, for each device you
must first:
• Create the Vmux nodes in the SNMPc Management Console map, according to
the following table.
Table 4-3. Typical Application - Host IP Settings
Site Device Type IP Address Network Mask Gateway
A Vmux-2100 172.17.158.11 255.255.255.0 172.17.158.1
B Vmux-210 172.17.158.9 255.255.255.0 172.17.158.1
C Vmux-110 172.17.158.14 255.255.255.0 172.17.158.1
To add a Vmux device to the SNMPc Management Console map:
1. From the SNMPc map Insert menu, select map Object > device….