System information

Vmux-210 Ver. 1.0 Configuring the Vmux Units for Management 4-1
Chapter 4
Configuring a Typical
Application
This chapter provides detailed instructions for setting up a typical application
using a Vmux-110 (8 E&M) and a Vmux-210 (30 FXS) operating opposite a central
Vmux-2100 unit over an IP network, and contains the following sections:
• Configuring the Vmux Units for Management
• Connecting the Vmux Units to the Management Station
• Configuring the Network Management Station
• Creating Bundles (Circuits)
Application
Figure 4-1 illustrates a typical TDM application, in which a Vmux-110 and a
Vmux-210 operate opposite a central Vmux-2100 over an IP network. Two E1
trunks are transmitted by the central Vmux-2100 over an IP network to two
remote Vmux units.
Vmux-2100
-
10/100Base-T
Central Site
172.17.158.11
172.17.158.14
10/100Base-T
17 2. 17.15 8. 9
Site A
Site B
Site C
17 2.17. 15 8.12
Vmux- 110
Vmux - 210
8 x E&M
E1
Phone
IP/ETH
Network
NMS
Phone
Phone
Phone
Phone
Phone
30 x FXS
10/100Base-T
Figure 4-1. Typical Application with a Vmux-110 and a Vmux-210 opposite a Vmux-2100