System information

Chapter 3 Configuration Management User's Manual
3-44 Additional Tasks Vmux-210 Ver. 1.0
 To upload the configuration from the Agent:
1. In Edit mode only, select the device.
2. From the Configuration menu, select Read.
3. Click <OK> to upload the current Agent configuration automatically.
The configuration upload commences immediately. No additional user
confirmation is requested.
The Read Configuration dialog box remains open while the data is uploading. A
Progress Bar illustrates the upload progress.
Figure 3-28. Read Configuration Dialog Box
Table 3-27. Read Configuration Parameters
Parameter Possible Values / Remarks
Description Brief description of each agent configuration in the RADview database
Last Update
Date Date of the last update of each configuration
Time Time of the last update of each configuration
By IP address of the manager that performed the last update of each configuration
0.0.0.0–255.255.255.255
[OK] Click <OK> to automatically upload the current Agent configuration
[Cancel] Click <Cancel> to close the Read Configuration dialog box without uploading the current
Agent configuration
[Abort] Click <Abort> to stop reading the current Agent configuration
Note