System information

User's Manual Chapter 3 Configuration Management

Vmux-210 Ver. 1.0 Additional Tasks 3-31

 To view the Bundle Connection Table parameters:

1. In either Agent or Edit mode, select the device.

2. From the Configuration menu, select Bundles Connection Table….

The Bundle Connection Table provides general information about each bundle

connection. More details are provided in the Bundle Connection Details dialog.

Click on the Details button to view all data for a selected bundle (see below).

Figure 3-21. Bundle Connection Table

Table 3-20. Bundle Connection Parameters

Parameter Possible Values / Remarks

Bundle No. 1..12

Bundle Name Unique bundle name (string, maximum 10 characters)

Admin Status Indicates state of the link

Connected, Disconnected (frames are not sent from this channel)

Dest. IP IP address of the destination mux

0.0.0.0–255.255.255.255

Dest. Type --, PBX, Phone

Dest. Bundle Bundle number in the destination mux

1..30

Default: 1

[Details] Click <Details> to view detailed configuration information for the selected Bundle

Connection table entry.

This button is enabled only when a table entry is selected.

[Close] Click <Close> to close the dialog box.

[Refresh] Click <Refresh> to refresh the data displayed in the dialog box.

Not