System information

User's Manual Chapter 3 Configuration Management
Vmux-210 Ver. 1.0 Additional Tasks 3-29
Table 3-18. TS Assignment Parameters
Parameter Possible Values / Remarks
Link E1 or Link T1 Time Slot Number
E1: 1...31
T1: 1...24
Cells are color coded to indicate time slot usage or availability:
Green: In use
Gray: Available (except for time slot 16 of an E1 port)
Dark Blue: Non-connectable and Line Type is E1-MF or E1-CRC-MF
To network Status of the time slot
x – The time slot is allocated
empty – The time slot is available
Cells are color coded to indicate time slot usage or availability:
Yellow: In use
Gray: Available
Dark Blue: Non-connectable (for example: time slot 16 of an E1 or E1-CRC port)
[Close] Click <Close> to close the dialog box
The left-most column also changes color to indicate aggregate usage or
availability in the following manner:
• Green: All of the time slots are used
• Gray: All of the time slots are available
• Yellow: Some of the time slots are used
Displaying Analog Voice Port Time Slot Assignments
The TS Assignment… command enables you to display time slot assignments for
IP bundles. For information on creating and managing bundle connections and
time slots using the Service Center, refer to
Chapter 7 of the RADview SC/Vmux
System Manual
.
• This dialog box is useful in Edit mode, even when there is no connection with
the Agent.
• When there is a connection with the Agent, perform a Read before opening
the TS Assignment dialog box, to ensure that the most up-to-date information
is displayed. The Read command is described in
Reading (Uploading) the Agent
Configuration, on page
3-43.
• You should assign which Time Slots to use according to the bandwidth
allocated from the carrier. For example: if the available bandwidth is 128 kbps,
then you should select two Time Slots of 64 kbps each. The carrier may also
require you to use specific Time Slot numbers. Vmux-210 uses all of the Time
Slots that you define.
Not
e