System information

Chapter 3 Configuration Management User's Manual
3-24 Setting the Operational Parameters Vmux-210 Ver. 1.0
Serial Link Port Software Configuration
Figure 3-15. Serial Link Port SW Cfg Tab – Agent Mode
Table 3-14. Serial Link SW Cfg Tab Parameters
Parameter Possible Values / Remarks
Port Serial Link
Interface Type The line type of the interface
V.35, X.21, EIA530, EIA530A
Default: V.35
Connect Indicates whether the port should be considered in any of the VMUX
algorithms
No, Yes
Default: No
Clock Mode DCE, DTE
Default: DCE
Rate (kbps) 1x64=64, 2x64=128, .., 31x64=1984, 32x64=2048
Default: 1x64=64
Control Signals
(only available when
Interface Type is set to
V.35 and Clock Mode is set
to DTE)
Ignore, Implement
Default: Ignore
Fragmentation (bytes) 200..1550
Default: 610
HDLC Mode Transparent, Cisco Bridged ETH
Default: Transparent