System information

Chapter 3 Configuration Management User's Manual
3-14 Setting the Operational Parameters Vmux-210 Ver. 1.0
Table 3-8. FXS Timeouts and Cadences Parameter
Parameter Possible Values / Remarks
Timeouts
Ringing (Sec) 60..600
Default: 120
Flash (mSec) 10..2000
Default: 700
Ringing Cadence 1
On Period #1 (Sec) 0.1..5.0
Default: 1.0
Off Period #1 (Sec) 0.1..5.0
Default: 3.0
Period #2 Enabled Checked, Unchecked
When checked, Period #2 is enabled
On Period #2 (Sec) 0.1..5.0
Default: 1.0
Note: This parameter is enabled when Period #2 is enabled.
Off Period #2 (Sec) 0.1..5.0
Default: 3.0
Note: This parameter is enabled when Period #2 is enabled.
Ringing Cadence 2
On Period #1 (Sec) 0.1..5.0
Default: 1.0
Off Period #1 (Sec) 0.1..5.0
Default: 3.0
Period #2 Enabled Checked, Unchecked
When checked, Period #2 is enabled
On Period #2 (Sec) 0.1..5.0
Default: 1.0
Note: This parameter is enabled when Period #2 is enabled.
Off Period #2 (Sec) 0.1..5.0
Default: 3.0
Note: This parameter is enabled when Period #2 is enabled.
[Refresh] Click <Refresh> to refresh the data displayed in the dialog box.
[Close] Click <Close> to close the FXS Timeouts and Cadences dialog box
[Set]
(Edit mode)
Click <Set> to update the FXS Timeouts and Cadences information with the new
values
[Cancel]
(Edit mode)
Click <Cancel> to cancel the selections made in the dialog box and close the box