System information

User's Manual Chapter 3 Configuration Management
Vmux-210 Ver. 1.0 Setting the Operational Parameters 3-9
Figure 3-6. Bridge Ports Configuration Dialog Box
Table 3-6. Bridge Ports Configuration Parameters
Parameter Possible Values/Remarks
Ingress Filtering When Ingress Filtering is enabled, Vmux-210 discards incoming frames for VLANs
that do not include this port in its member set. When Ingress Filtering is disabled,
the port accepts all incoming frames. This control does not affect VLAN
independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent
BPDU frames, such as GMRP.
Enable, Disable
Default: Disable
Port VID The PVID or VLAN ID that is assigned to untagged frames or Priority-Tagged frames
received on this port.
1..4094
Default: 1
Default Priority Tag The default ingress User Priority for this port. This only affects media, such as
Ethernet, that do not support native User Priority.
0..7
Default: 0
Egress Tag Handling How the Egress VLAN Tag is processed. It is mainly for use with Double Tagging.
None, Stacking
Default: None
Ingress Tag Handling How the Ingress VLAN Tag is processed. It is mainly for use with Double Tagging.
None, Stripping
Default: None
[Close] Click <Close> to close the dialog box.
[Refresh] Click <Refresh> to re-load and display the current parameters.
[Set] Click <Set> to save the changes.
[Cancel] Click <Cancel> to cancel the selections made in the dialog box and close the box