System information

User's Manual Chapter 3 Configuration Management
Vmux-210 Ver. 1.0 Setting the System Parameters 3-7
Configuring the Manager List
In order to remotely configure Vmux-210, the IP address of the NMS must be
listed in the Manager List. The Manager List command enables you to display and
configure the Manager List, where you designate the destination NMS stations
for SNMP traps.
 To configure the manager list:
1. In Agent mode, select the device.
2. From the Options menu, select Manager List.
3. Configure the desired parameters and click <Set>.
Figure 3-5. Manager List Dialog Box