System information

Chapter 3 Configuration Management User's Manual
3-6 Setting the System Parameters Vmux-210 Ver. 1.0
Selecting the Date Format
The Date Format command enables you to select the format in which you want
the system date to appear in all dialog boxes.
 To set the date format:
1. In Agent mode only, select the device.
2. From the Configuration menu, select Date Format.
3. Select a date format from the drop-down menu. Possible formats are:
 DD-MM-YYYY
 MM-DD-YYYY
 YYYY-MM-DD
Setting the Date and Time
The Date & Time command enables you to adjust the system clock.
 To set the system date and time:
1. In Agent mode only, select the device.
2. From the Configuration menu, select Date & Time.
3. Configure the desired parameters and click <Set>.
Figure 3-4. Date & Time Setup Dialog Box
Table 3-4. Date & Time Setup Parameters
Parameter Possible Values / Remarks
Format Date format selected with the Date Format command
Date System date in the format selected
Time System time in HH:MM:SS format
[Set] Click <Set> to send new values to the agent
[Cancel] Click <Cancel> to cancel the selections made in the dialog box and close the box