System information

User's Manual Chapter 3 Configuration Management
Vmux-210 Ver. 1.0 Setting the System Parameters 3-3
Table 3-1. System Information Parameters
Parameter Possible Values/Remarks
Description A description of the device, including hardware and software versions
Object ID
(Agent mode only)
The device’s SNMP Object ID (without the "rad" prefix
Name The name of the device, a string of up to 12 characters
Contact The name of the person responsible for the functioning of this device, a string
of up to 32 characters
Location The exact location of this device, a string of up to 32 characters
System Up Time
(Agent mode only)
The amount of time that elapsed since this device was initialized or reset.
Format: XX Days HH:MM:SS
Number of Interfaces
(Agent mode only)
The number of physical and logical interfaces on this device
[Set]
(Agent mode only)
Click <Set> to save System Information settings
[Cancel]
(Agent mode only)
Click <Cancel> to cancel the selections made in the dialog box and close the box
[Refresh]
(Agent mode only)
Click <Refresh> to update the System Information
[Close]
(Edit mode only)
Click <Close> to close the System Information dialog box
Setting Port User Information
The User Info command enables you to assign user information for a port. This
information is useful for keeping track of contact information specific to each
port.
 To change port user information parameters:
1. In Edit mode, select a port.
2. From the Configuration menu, select User Info.
3. Configure User Name and User Info.
4. Click <Set>.