System information

User's Manual Chapter 2 Installation and Operation
Vmux-210 Ver. 1.0 Using the Graphical User Interface 2-9
Table 2-3. Element Manager Status Bar Messages
Message Status
Working... Displayed from the moment when a request is sent to the network
element (Vmux-210), until data is received or a certain time expires
(around 5 seconds).
Waiting... Displayed while the RADview station waits more than a few seconds
for the network element response, but less than the time-out time.
Interrupted When all attempts to communicate with network element failed (time-
out), or when the response was an SNMP error.
Ready Displayed after the process has been successfully completed.
Common Dialog Buttons
Function buttons, located in a sub-window or dialog box, each initiate the
execution of an operation. The most common buttons, and their respective
functions, are listed in the following table.
Table 2-4. Common Dialog Buttons
Button Function
Set Confirm and activate the selections made in the dialog box and close
the box.
Apply Confirm and activate the selections made in the dialog box without
closing the box.
Cancel Cancel the selections made in the dialog box and close the box.
Close Close the dialog box without any other effect.
OK Confirm the message displayed in an information box, and close the
box.
Add Open a new dialog box that is used to add a new item to the list or
table displayed in the dialog box.
Change Open a new dialog box that is used to change an item selected in the
list or table displayed in the dialog box.
Delete Delete a selected item from the list or table displayed in the dialog box.
Refresh Poll the managed unit to retrieve again the information needed to
display the current dialog box. This action updates the displayed
information.