System information

User's Manual Chapter 2 Installation and Operation
Vmux-210 Ver. 1.0 Pre-configuring Vmux-210 for Network Management 2-3
Configuration>System>Management>Host IP
1. IP Address... (172.17.172.191)
2. Subnet Mask... (255.255.255.0)
3. Default Gateway... (172.17.172.1)
4. DHCP Client (Disable)
5. Read... (public)
6. Write... (private)
7. Trap... (public)
Figure 2-1. Configuring the Host IP Parameters
Configuring the Manager List
In order to remotely configure Vmux-210, the NMS needs to be listed in the
Manager List. The Manager List command enables you to display and configure
the Manager List, where you designate the destination NMS stations for SNMP
traps.
 To configure the Manager List:
1. Display the Manager List menu (Configuration > System > Management >
Manager list).
2. Enter the Manager IP address of the Network Management Station.
3. Save the changes.
Configuration>System>Management>Manager list
Manager ID IP Address
1 172.17.172.100
2 0.0.0.0
3 0.0.0.0
4 0.0.0.0
5 0.0.0.0
1. Change cell ... (0.0.0.0)
Figure 2-2. Configuring the Manager List