System information

User’s Manual Chapter 7 Fault Management
Vmux-210 Ver. 1.0 Monitoring Object Status 7-17
Displaying the New Buffer Alarms List
The History Log > New command enables you to display the alarm buffer that
contains the alarms recorded since the last time you ran this command.
 To display the alarm buffer for new alarms:
1. In Agent mode, select the device.
2. From the Fault menu, select History Log > New.
3. Sort the list of alarms by any one of the column values by clicking on the
column header. Each click toggles between ascending and descending order.
Figure 7-11. New Buffer Alarms Dialog Box
Table 7-9. New Buffer Alarms Parameters
Parameter Possible Values / Remarks
Code Alarm code
Port Port reporting the alarm
Description Description of the alarm
Status Off, Event, Minor, Major, Warning, Critical
Date Date in the format DD-MM-YYYY
Time Time in the format: HH:MM:SS
[Print] Click <Print> to print the New Buffer Alarms list. (disabled if the list if empty).
[Save to File] Click <Save to File> to save the New Buffer Alarms list to a file. The Save dialog box
appears. In the File Name field, enter the name of the file. In the File of type field, select
Acrobat (*pdf) or HTML (*.htm). Click Save (disabled if the list if empty).
[Close] Click <Close> to close the New Buffer Alarms list.
[Refresh] Click <Refresh> to update the New Buffer Alarms list.