System information

Chapter 7 Fault Management User’s Manual
7-6 Monitoring Object Status Vmux-210 Ver. 1.0
IP Bundle Active Alarms
Figure 7-3. IP Bundle Active Alarms Dialog Box
Table 7-3. IP Bundle Active Alarms Parameters
Parameter Possible Values/Remarks
Bundle No. 1…12
Bundle Name Unique bundle name (string, maximum 10 characters)
Admin Status Indicates state of the link
Connected, Disconnected (frames are not sent from this channel)
Dest. IP IP address of the destination mux
0.0.0.0–255.255.255.255
Dest. Type (only on
FXS device)
PBX, Phone
Dest. Bundle Bundle number in the destination mux
1..30
[All Bundles] Click <All Bundles> to view a list of alarms for all Bundle Connection table entries.
This button is disabled if the table is empty.
[One Bundle] Click <One Bundle> to view a list of alarms for the selected Bundle Connection table
entry.
This button is enabled only when a table entry is selected.
[Close] Click <Close> to close the dialog box.
[Refresh] Click <Refresh> to refresh the data displayed in the dialog box.