System information

User’s Manual Chapter 7 Fault Management
Vmux-210 Ver. 1.0 Monitoring Object Status 7-5
Table 7-2. Mux Active Alarm List Parameters
Parameter Possible Values / Remarks
Code Alarm code
Description Description of the alarm
Severity No Report, Event, Minor, Major, Warning, Critical
State On, Off
Mask Mask, None
Counter Number of times this alarm has been triggered since the last time the system was
restarted or the alarm was cleared.
[Print] Click <Print> to print the Mux Active Alarm List
This button is disabled if the table is empty.
[Save to File] Click <Save to File> to save the Mux Active Alarm List. The Save File dialog box appears.
In the File Name field, enter the name of the file. In the File of type field, select Acrobat
(*pdf) or HTML (*.htm). Click Save.
This button is disabled if the table is empty.
[Clear] Click <Clear> to clear the Mux Active Alarm list.
This button is disabled if the table is empty.
[Close] Click <Close> to close the Mux Active Alarm List dialog box.
[Refresh] Click <Refresh> to update the Mux Active Alarm List.
Viewing IP Bundles Active Alarms
The Display > IP Bundles… command enables you to view IP Bundle alarms.
 To view all IP Bundles Active Alarms:
1. In Agent mode, select the device.
2. From the Fault menu, select Alarms > Display > IP Bundles…
The IP Bundle Active Alarms dialog box appears (see
IP Bundle Active
Alarms
, page 7-6 ).
3. To view a list of all alarms for all bundles, click <All Bundles>.
The All IP Bundles Active Alarm List dialog box appears (see
All Bundles
Active Alarm List,
page 7-7 ).
4. To view a list of alarms for a single bundle, select a table entry and click
<One Bundle>.
The IP Bundle Active Alarm List dialog box appears (see
Bundle Active
Alarm List,
page 7-9 ).
As the list of alarms is prepared, a Progress Bar window illustrates the upload
progress. If no alarms exist, the list will be empty.