System information

Chapter 6 Performance Management User’s Manual
6-12 Viewing Transmit Frame Types Statistics for a LAN Port Vmux-210 Ver. 1.0
Figure 6-7. Transmit Frame Types Statistics Dialog Box
Table 6-6. Transmit Frame Types Statistics Parameters
Parameter Possible Values / Remarks
Port ETH-NET, ETH-USER
Running Time The system up time, i.e., the time (in hundredths of a second) since the network
management portion of the system was last re-initialized. Format: DD days HH:MM:SS
Status Bar
Countdown Timer Displays number of seconds to next polling action. Only in use when polling is enabled.
Tx Frame Types
Table&Graph
Parameters
Note: The following parameters vary depending on the device's hardware version. The
parameters listed here are for a device hardware version of 1.1 or greater.
Correct Frames Counter of correct frames transmitted
Bytes Counter of bytes transmitted
Broadcast Frames Counter of broadcast frames.
Multicast Frames Counter of multicast frames.
[Reset Counters] Click <Reset Counters> to reset the counters of selected port to 0.
[Close] Click <Close> to close the TX Frame Types Statistics dialog box
[Poll] Click <Poll> to update the information displayed in the dialog box