System information

User’s Manual Chapter 6 Performance Management
Vmux-210 Ver. 1.0 Viewing Transmit Frame Types Statistics for a LAN Port 6-11
Table 6-5. LAN Receive Frame Types Statistics Parameters
Parameter Possible Values / Remarks
Port ETH-NET, ETH-USER
Running Time The system up time, i.e., the time (in hundredths of a second) since the network
management portion of the system was last re-initialized.
Format: DD days HH:MM:SS
Status Bar
Countdown Timer Displays number of seconds to next polling action. Only in use when polling is enabled.
Rx Frame Types
Table&Graph
Parameters
Note: The following parameters vary depending on the device's hardware version. The
parameters listed here are for a device hardware version of 1.1 or greater.
Frames Counter of received frames.
Bytes Counter of received bytes.
Correct Frames Counter of received correct frames.
Correct Bytes Counter of received correct bytes.
Correct Broadcast
Frames
Counter of received correct broadcast frames.
Correct Multicast
Frames
Counter of received correct multicast frames.
[Reset Counters] Click <Reset Counters> to reset the counters of selected port to 0.
[Close] Click <Close> to close the dialog box
[Poll] Click <Poll> to update the information displayed in the dialog box
6.7 Viewing Transmit Frame Types Statistics for a
LAN Port
The Tx Frame Types command enables you to view Ethernet port transmit
statistics.
 To view transmit statistics for an Ethernet port:
1. In Agent mode only, select the Ethernet port.
2. From the Statistics menu, select LAN Statistics > Tx Frame Types.