Specifications

Installation and Operation Manual Chapter 4 Configuration
Vmux-210 Ver. 1.1 Configuring for Operation 4-31
Table 4-31. Signaling Bits Parameters
Parameter Description Possible Values/
Reference
On Hook On Hook signaling event
Note: Cannot be the same value as Off Hook.
0
1
(each bit)
Off Hook Off Hook signaling event
Note: Cannot be the same value as On Hook.
0
1
(each bit)
Ring I Ring I signaling event 0
1
(each bit)
Ring II Ring II signaling event 0
1
(each bit)
Reverse Polarity Reverse Polarity signaling event 0
1
(each bit)
Pulse Metering Pulse Metering signaling event 0
1
(each bit)
Deleting a Bundle
 To delete a bundle:
1. From the Main Menu, select Configuration > Bundles > Configure >
Delete Bundle.
2. Type the number of the bundle you want to delete, and then press <Enter>.
Configuring a Bundle’s Channel Distribution
 To display/configure channel distribution:
• From the Main Menu, select Configuration > Bundles > Channel Distribution.
Channel Distribution
1. Display[]
2. Configure >
Figure 4-32. Channel Distribution Menu