Specifications

Chapter 4 Configuration Installation and Operation Manual
4-22 Configuring for Operation Vmux-210 Ver. 1.1
Table 4-21. Edit Bundle Parameters (Cont.)
Parameter Description Possible Values/
Reference
Connectivity Parameters Opens the Connectivity Parameters menu See Figure 4-25
Voice Parameters Opens the Voice Parameters menu See Figure 4-26
Signaling Parameters Opens the Signaling Parameters menu See Figure 4-30
Bundle Name User-defined name of the bundle
CAS Redundancy Determine whether or not to duplicate CAS packets for
the TS assigned to the bundle
Disable
Enable
Default: Disable
Configuring a Bundle’s Routing Parameters
 To configure a bundle’s routing parameters:
• From the Main Menu, select Configuration > Bundles > Configure >
Edit Bundle > Routing Parameters.
Routing Parameters
1. Destination IP... (172.17.172.193)
2. Destination Bundle[1 - 8063]... (1)
3. TOS Parameters ... (0)
4. VLAN Parameters>
Figure 4-22. Routing Parameters Menu
Table 4-22. Routing Parameters
Parameter Description Possible Values/
Reference
Destination IP Destination IP address of the bundle Default: 0.0.0.0
Destination Bundle Index number of the destination bundle 1..8063
TOS Parameters Opens the TOS parameters menu See Figure 4-23
VLAN Parameters Opens the VLAN parameters menu See Figure 4-24
Configuring a Bundle’s TOS Parameters
 To configure a Bundle’s TOS Parameters:
• From the Main Menu, select Configuration > Bundles > Configure >
Edit Bundle > Routing Parameters > TOS Parameters.