Specifications

Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual
6-6 Monitoring Performance Vmux-210 Ver. 1.1
Table 6-2. Packets Tracking (Cont.)
Field Description
Num of Series With 1
Missing Packet
Number of series of consecutive packets with one missing packet
Num of Series With 2
Missing Packets
Number of series of consecutive packets with two missing packet
Num of Series With 3
Missing Packets
Number of series of consecutive packets with three missing packet
Num of Series With 4
Missing Packets
Number of series of consecutive packets with four missing packet
Num of Series With 5
Missing Packets
Number of series of consecutive packets with five missing packet
Num of Series With more
than 5 Missing Packets
Number of series of consecutive packets with more than five missing packet
Bundle statistics must be cleared after the bundle has gone up, or the Seq Num
mechanism will be irrelevant.
This is due to the fact that Seq Num fields are meaningless during the bundle set-
up time (that is, the time it takes the bundle to go into "connected" state).
Displaying Timeslot Voice Statistics
The Vmux-210 software enables you to evaluate performance of a separate
timeslot and the DSP used by it (see
Figure 6-6 ). Table 6-3 describes the timeslot
voice statistics values.
 To display the timeslot voice statistics:
1. From the Main Menu, select Monitoring > Statistics > Voice TS.
The Voice Statistics menu appears (see
Figure 6-5 ).
2. From the Voice Statistics menu, select a Time Slot, and then select Display.
The Voice Statistics Timeslot screen appears (see
Figure 6-6 ).
3. Press <Enter> to refresh the display.
4. Press ‘C’ to clear the statistics.
5. Press <Esc> to exit the Voice Statistics Timeslot Statistics screen.
Voice TS
1. Time Slot[1 - 30]... (1)
2. Display[]
Figure 6-5. Voice Statistics Menu
Note