Specifications

Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual
6-2 Monitoring Performance Vmux-210 Ver. 1.1
Monitoring Bundles
The management software enables you to evaluate the performance of each of
the 12 Vmux-210 bundles by displaying bundle statistics and tracking packets.
Bundles
1. Bundle Number[1 - 12]... (1)
2. Display Statistics[]
3. Display Packets Tracking
Figure 6-2. Bundles Statistics Menu
Displaying Bundle Statistics
Each bundle may have one of the following states:
• Connect – The bundle is connected
• Disconnected – The bundle is disconnected
• Echo Wait – There is physical connection, but the remote bundle is not active.
This might indicate a Layer 4 connectivity problem (UDP).
• IP OOS – There is no physical connection between the bundles. The reason
for this may be an illegal IP address of the destination E1/T1 group, or a
duplicate IP address in the network.
 To display bundle statistics:
1. From the Main Menu, select Monitoring > Statistics > Bundles.
The Bundles Statistics menu appears (see
Figure 6-2 ).
2. From the Bundles Statistics menu, select a Bundle Number, and then select
Display Statistics.
The Bundle Statistics screen appears (see
Figure 6-3 ).
3. Press <Enter> to refresh the display.
4. Press ‘C’ to clear the statistics.
5. Press <Esc> to exit the Bundle Statistics screen.