Specifications

Chapter 4 Configuration Installation and Operation Manual
4-54 Configuring for Operation Vmux-210 Ver. 1.1
 To configure the Static PAT Table:
• From the Main Menu, select Configuration > Applications > Router > NAT >
Edit NAT > Static PAT Table.
Static PAT Table
Real IP Virt IP Min Port Max Port Protocol
1 10.10.10.15 172.17.160.23 20 20 11
2 0.0.0.0 0.0.0.0 0 0 0
3 0.0.0.0 0.0.0.0 0 0 0
4 0.0.0.0 0.0.0.0 0 0 0
5 0.0.0.0 0.0.0.0 0 0 0
6 0.0.0.0 0.0.0.0 0 0 0
7 0.0.0.0 0.0.0.0 0 0 0
8 0.0.0.0 0.0.0.0 0 0 0
9 0.0.0.0 0.0.0.0 0 0 0
1. Change cell ... (10.10.10.15)
Figure 4-59. Static PAT Table
Table 4-54. Static PAT Table Parameters
Parameter Description Possible Values/
Reference
Real IP IP address on real IP network
Virt IP IP address on virtual IP network
Min IP Lowest port number to which this
translation applies
1..65535
Max IP Highest port number to which this
translation applies
1..65535
Protocol Protocol number (in IP header) to which this
translation applies
1..255
Deleting a NAT
 To delete a NAT:
1. From the Main Menu, select Configuration > Applications > Router > NAT >
Delete NAT.
2. Type the number of the NAT you want to delete, and then press <Enter>.