Specifications

Installation and Operation Manual Chapter 4 Configuration
Vmux-210 Ver. 1.1 Configuring for Operation 4-43
RIP
1. RIP Status (Enable)
2. Send RIP type> (None)
3. Receive RIP type> (None)
Figure 4-45. RIP Menu
Table 4-43. RIP Parameters
Parameter Description Possible Values/
Reference
RIP Status Enables RIP for this router port Enable
Disable
Default: Disable
Send RIP type Type of RIP messages to be sent by this
router port
Note: This parameter is available only when
RIP is enabled.
None
RIP1
RIP2
RIP1 & RIP2
Default: None
Receive RIP type Type of RIP messages to be received by this
router port
Note: This parameter is available only when
RIP is enabled.
None
RIP1
RIP2
RIP1 & RIP2
Default: None
Configuring the Firewall for a Router Port
This section describes configuration of the firewall for an individual Router port.
For general firewall configuration, see
Setting Global Firewall Parameters on page
4-55 .
 To configure the firewall for a Router port:
• From the Main Menu, select one of the following:
 Configuration > Applications > Router > Interfaces >
Uplink Port Configuration> Firewall
 Configuration > Applications > Router > Interfaces >
Network Port Configuration> Firewall
 Configuration > Applications > Router > Interfaces >
User Port Configuration> Firewall.