Specifications

Installation and Operation Manual Chapter 4 Configuration
Vmux-210 Ver. 1.1 Configuring for Operation 4-33
Configuring Channel Distribution (Timeslots)
 To configure ports distribution:
• From the Main Menu, select Configuration > Bundles > Channel Distribution >
Configure.
Configure Channel Distribution
1. Update from Channel [1 - 30]... (1)
2. To Channel [1 - 30]... (1)
3. Type > (N.C)
4. Bundle[1 - 12]... (1)
5. Destination Port ID[1 - 4]... (1)
6. Destination Time Slot ID[1 - 31]... (1)
7. Update Time Slot
Figure 4-34. Configure Channel Distribution Menu
Table 4-34. Configure Channel Distribution Parameters
Parameter Description Possible Values/
Reference
Update from
Channel
Start of timeslot range to configure 1..30
To Channel End of timeslot range to configure 1..30
Type Service type of this timeslot range N.C.
Voice
Default: Voice
Bundle Bundle to which these timeslots are
associated
1..12
Default: 1
Destination Port ID Port on the remote device to which these
timeslots are destined
Note: The Dest Port must be defined as 1
when the remote device is not a Vmux-2100.
1..4
Default: 1
Destination Time
Slot ID
Timeslot on the remote device to which
these timeslots are destined
1..31
Default: 1
Update Time Slot Applies the changes