System information

Chapter 6 Performance Management IPmux-8/16 User’s Manual
6-2 Viewing Bundle Statistics
Figure 6-2. Bundle Connection Table – Statistics
Table 6-1. Bundle Connection Parameters – Statistics
Parameter Remarks
Slot No. Slot nunber
1 to 4
Channel No. Channel to be configured
1 to 8
Bundle No. For E1: 1 to 496
For T1: 1 to 384
Bundle Name Bundle name for selected channel.
Admin Status Connected, Disconnected
Oper. Status Connected, Disabled, Remote Fail, Local Fail
Dest. Name Logical name or IP address of the destination IPmux
Far-End TDM Status Status of the Far-End TDM Line (failure state information):
No Alarm – No Alarm / No Defect
Fail - Alarm Indication Signal (AIS)
RDI - Remote Defect Indication
Sequence Errors Number of times frames were dropped because frames were received from the
network with SN fields not equal to the last SN + 1 (or 2).
Buffer Underflow Number of times frames were dropped because the receive buffer was in an underrun
state. The buffer enters underflow state when:
• Sequence errors occur
• Flow underrun takes place due to PDV expiration.
• An overflow condition occurs.
Buffer Overflow Number of times that frames were droopped because the receive buffer exceeded the
maximum allowed depth.