System information

IPmux-8/16 User’s Manual Chapter 4 Configuring Typical Applications
Creating Circuits 4-11
Figure 4-8. Manual Circuit Dialog Box – Primary Circuit Tab
5. If the devices are on a network segment that uses VLANs, click on the EP
Param Tab (Figure 4-9) and configure the following parameters:
 VLAN Tagging = Enabled (Checked)
 VLAN ID = 111
 VLAN Priority = 2
Use the vertical scroll bar on the right side of the dialog box to scroll the window
and display fields that are off the page.
Note