System information

IPmux-8/16 User’s Manual Chapter 3 Configuration Management
Configuring IPmux-8/16 Ports at the Physical Layer 3-21
Figure 3-17. T1 Parameters Dialog Box
Table 3-10. E1/T1 Parameters
Parameter Possible Values / Remarks
Slot 3, 4
Port CH1 to CH8
Type E1, T1
Admin. Status Enabled, Disabled
Transmit Clock Source Source of the transmit clock
Internal: Local clock source is used
External: Received from the other interface network and used for data
transmission on this interface
Loopback: Transmit clock recovered from received data
Adaptive
: Adaptive clock regeneration
Rx Sensitivity Determines the maximum attenuation of the receive signal that can be
compensated for by the interface receive path
Long Haul, Short Haul
(only applicable for E1 ports)