System information

Chapter 3 Configuration Management IPmux-8/16 User’s Manual
3-4 Using the RADview User Interface
System Level Menu Options
The element manager allows you to configure the device parameters.
 To configure an IPmux via the element manager:
• Select the node in the Service Center map and from the Configuration menu,
select Element Manager...
The Element Manager dialog box (Figure 3-1, Figure 3-2, Figure 3-3)
appears allowing you to configure any of the elements listed.
Table 3-2. System Management Options
Tasks - Configuration Dialog Box and Parameter Location Path
Setting system information System Information dialog box
See Configuring System Information
Configuration
System Info…
Setting system parameters System Parameters dialog box
See Configuring System Parameters
Configuration
System Parameters…
Viewing system inventory System Inventory dialog box
See Viewing System Inventory
Configuration
System Inventory…
Setting Bundle values Bundle Connection Table
See Managing Bundle Connections
Configuration
Bundles…
Bundle ConnectionTable…
Configuring the VLAN Table of
the Ethernet Switch
VLAN Table dialog box
See Configuring the VLAN Table of the
Ethernet Switch
Configuration
VLAN Table
Bridge 1 (or 2)
Restoring default configuration See Resetting IPmux-8/16 to the Default
Configuration
Configuration
System Commands
Default Configuration
Resetting IPmux configuration See Resetting IPmux-8/16 Configuration
System Commands
Reset
Clearing MAC Tables See Clearing the MAC Tables Configuration
System Commands
Clear MAC Table
Bridge 1 (or 2)
Polling the agent See Polling the Agent Configuration
System Commands
Poll Agent
Tasks – Fault Dialog Box and Parameter Location Path
Viewing active alarms Active alarm list
See Viewing Active Alarms
Fault
Alarms…
Viewing the history log System log buffer
See Viewing the History Log
Fault
History Log
List…
Clearing the History Log See Clearing the History Log Fault
History Log
Clear…