Specifications

Appendix E Parameters and Screens IPmux-4 Installation and Operation Manual
E-18 E1/T1 Configuration Parameters
T1 Physical Layer Configuration
PHYSICAL LAYER CONFIGURATION
1. Channel Status Enable
2. Transmit Clock Source Adaptive
3. Loopback State Disable
4. Channel Type T1-ESF
5. Channel Code B8ZS
6. Channel Mode DSU
7. Channel Length/Tx Gain 0-133
8. Restore Time 1 second
9. Idle Code 7E
A. Signaling Mode CAS Enable
B. Cond. Data pattern 7F
C. Cond. CAS (AB/ABCD)pattern 01
E. Cond. CAS first 2.5sec pattern(FF=NULL) FF
ESC. Exit
Current port is the USER PORT
Select item from the menu.
Figure E-20. T1 Physical Layer Configuration Menu
When “unframed” mode is selected, the Restore Time, Idle Code, Signaling Mode,
Cond Data Pattern, Cond CAS (AB/ABCD) Pattern and Cond. CAS first 2.5sec
pattern (FF=NULL) fields are not present.
When CAS Disabled is selected, the Cond CAS Pattern and Cond. CAS first 2.5sec
pattern (FF=NULL) fields are not present.
Note
Main Menu
↓
2. Configuration
↓
3. E1/T1
Configuration
↓
1. Physical Layer
Order from: Cutter Networks
Ph:727-398-5252/Fax:[phone]
www.bestdatasource.com